The Tech Spec:Battery Lead Amperage: 240 amps
Cable Cross Section: 35.0 mm²
Conductor Construction: 451/0.30 Ømm
Resistance per metre at 20°c: 0.00056 Ω/km
Diameter including insulation: 11.8 Ømm
Terminals:
Tin-plated brass
What's in the box: (assembled)
1 x 35mm² 240 amp battery cable
1 x ring terminal
1 x standard battery terminal
All terminals are Crimped, Soldered & Heat shrink applied
Please Note:
Lengths are for the length of cable excluding terminals & Inline fuses.
Each Ring Terminal increases the length of the cable by approximately 3cm.
Each Inline Fuse Holder increases the length of the cable by approximately 9cm.
Standard Battery Terminals do not alter the length of the cable.
'Black Positive' is offered as an option as some customers prefer to use black cable throughout for both negative and positive cable runs. If you choose 'Black Positive', we will put a red marker on the black heat shrink on the ends of the cable and fit Positive battery terminals as required.
We offer a choice of Standard Hi-Flexible cable or Tinned Hi-Flexible cable.
Tinned cable is more suitable for use in harsher environments.
