Victron Energy Orion-Tr Smart 24/24V 17A (400W) Non-Isolated DC-DC Charger - ORI242440140

Product Customer Reviews

Victron Energy Orion-Tr Smart 24/24V 17A 𨐀W) Non-Isolated DC-DC Charger - ORI242440140

Large View

Media Gallery and Data sheet

We can make up the cables to your spec (& supply the fuses required) on page 7 of the Data Sheet. Click on the link,

https://www.electricalcarservices.com/battery--cable-leads-made-to-order-/c-p-0-0-535

or go to, Battery & Cable Leads Made To Order.

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

Features

Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Fully programmable
Battery charge algorithm (configurable) or fixed output.

Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

For lithium batteries absorption time is fixed, default 2 hours.

Alternatively, a fixed output voltage can be chosen.

Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.

High temperature protected
The output current will reduce at high ambient temperature.

IP43 protection
When installed with the screw terminals oriented downwards.

Screw terminals
No special tools needed for installation.

Input fuse (not replaceable)

Tech Spec

GTIN	8719076048985
Voltage	24/24V
Cont. Output Current	17A
Efficiency	89%
Bluetooth Enabled	Yes
Protection Category	IP43 (electronic components), IP22 (connection area)
Dimensions	H130 x W186 x D80mm
Weight	1.6Kg
Warranty	5 Years
Country of Manufacture	India